POOL FLOC - Swimming Pool Flocculant & Water Clarifier (Australia 2kg)

Pool Floc 2kg Powder – Professional Aluminium Sulphate Swimming Pool Flocculant & Settling Agent (Australia)

Pool Floc 2kg is an industrial-strength, premium pool flocculant powder directly imported from Australia (Made in Australia – Barcode: 9327018570020). Formulated with high-purity aluminium sulphate swimming pool grade, this product functions as an indispensable water clarifier flocculant and heavy-duty pool settling agent. When dissolved, it instantly precipitates and binds microscopic colloidal debris, dead algae cells, and silt into heavy, cohesive floc particles that settle firmly to the pool floor within 12 hours. Conveniently packed in moisture-resistant 2 Kg Net zip pouches, it provides the ultimate rescue solution to clear severe water cloudiness, making it the preferred choice for commercial operators looking to buy pool floc australia bulk.

Technical Characteristics & Commercial Dosing Guide

Chemical Flocculation Mechanism & Key Advantages of Pool Floc 2kg

• Immediate Hydrolytic Micro-Coagulation: When a pool becomes severely cloudy from storm runoff, airborne organic dust, or dead algae debris, suspended colloidal particles are too fine to be captured by standard sand media. Upon broadcasting pool floc 2kg, Aluminium Sulphate rapidly hydrolyzes to form gelatinous, positively charged aluminum hydroxide flocs. These sticky flocs act as a molecular net, entrapping negatively charged colloidal impurities into large, dense agglomerates.
• Rapid 12-Hour Total Floor Precipitation: Due to superior Australian refining standards, the flocs form heavy masses that sink rapidly and pack tightly onto the pool floor within 12 hours under static water conditions. This eliminates stubborn mid-water hazy layers and provides a distinct line for easy vacuuming.
• Moisture-Proof 2kg Resealable Zip Pouch: Unlike bulky 25kg industrial alum bags that absorb atmospheric moisture and cake into solid rock, Pool Floc is packaged in a durable 2 Kg pouch with an airtight zip seal. This maintains freshness, prevents moisture clumping, and allows precise dose measurements without waste.
• Substantial Water Cost Savings: A single 2kg pouch remediates up to 75,000 Litres of severely compromised, cloudy water, restoring crystal clarity (< 0.5 NTU) overnight without draining and refilling valuable water.

Practical Applications in Commercial & Aquatic Facilities

Engineered for rapid water recovery, Pool Floc is a vital emergency remediation chemical across commercial aquatic environments:

• Post-Storm Recovery for Outdoor Pools: Clears heavy silt, clay runoff, and organic debris carried into outdoor resort and hotel pools after severe monsoon weather.
• Algae Bloom Cleanup Post-Chlorine Shocking: After shocking green or mustard algae with Chlorine 70% or TCCA, dead algae cells remain suspended as milky haze. Pool Floc aggregates dead cell fragments to the bottom for swift removal.
• Event Preparation & Fast Turnover: Rapidly clarifies high-end hotel and villa pools overnight prior to major guest events when regular multi-pass filtration is too slow.
• Raw Water Makeup Clarification: Rapidly clarifies new groundwater or municipal makeup water containing fine metallic oxide flocs prior to facility commissioning.

Standard 6-Step Technical Remediation Protocol

To ensure optimal flocculation efficiency and prevent sand media clogging, operators must adhere strictly to this 6-step procedure:

• Step 1 – Baseline Water Balance: Test pool chemistry: adjust Total Alkalinity (TA) to the standard 100 ppm, and balance pH within 7.2 – 7.6 (if alkalinity or pH is depressed, aluminum flocs will fail to form properly).
• Step 2 – Switch OFF Pumps: Turn off all circulation pumps, filtration units, and aeration blowers to allow the water to settle completely.
• Step 3 – Broadcast Pool Floc Powder: Accurately weigh the powder at 0.12 kg per 4,500 Litres (e.g., 1.2 kg for 45 m³, 2.0 kg for 75 m³). Broadcast dry powder evenly across the entire surface of the pool.
• Step 4 – Undisturbed Static Settling (12 HOURS): Leave the pool completely static and undisturbed with pumps off for a full 12 hours (recommended overnight) to allow flocs to settle firmly onto the floor.
• Step 5 – Vacuum Directly to WASTE: Attach a manual vacuum head and slowly vacuum the floor sediment directly out of the pool. MANDATORY: Set multi-port filter valve to WASTE. Never vacuum settled floc on the Filter setting to avoid blowing sediment back into the pool.
• Step 6 – System Restoration & Double Chlorine Dosing: Top up fresh water to operating level. Restart filtration and run continuously for 24 hours. Re-test and balance alkalinity and pH; simultaneously double the daily dosage of chlorine to re-establish sanitizer residual and sanitize water.

Commercial Supply Policy at THP Chemical

Tan Hung Phu Chemical Co., Ltd. (THP Chemical) is a direct importer and authorized B2B wholesale distributor of Pool Floc 2kg (Australia) across Vietnam:

• 100% genuine Australian import (Made in Australia) in original 2kg zip pouches bearing barcode 9327018570020 with fresh manufacturing dates.
• Comprehensive compliance documentation: Batch-specific Material Safety Data Sheet (MSDS), detailed technical application manuals, and official VAT invoices provided with each order.
• Substantial ready inventories at our central logistics facility in Ho Chi Minh City for immediate parcel, carton, or pallet delivery nationwide.
• Technical support from experienced aquatic engineers to assist commercial facilities with water chemistry recovery and vacuuming protocols.

Frequently Asked Questions (FAQ)

1. Why did the flocs fail to settle to the bottom after adding Pool Floc 2kg?

This is typically caused by two factors: low total alkalinity (TA) or low pH (pH < 7.0), which inhibits the chemical hydrolysis required to form heavy aluminum hydroxide flocs; or pumps left running during the settling phase. Always balance TA to 100 ppm, pH to 7.2 – 7.6, and keep pumps switched off for the full 12 hours.

2. Why must settled sediment be vacuumed strictly to WASTE?

The settled sediment is composed of sticky aluminum flocs, dirt, and organic dead algae. Vacuuming on the Filter setting will break the delicate flocs under pump shear, forcing fine debris through the sand bed back into the pool while permanently fouling the filter sand. Always vacuum on the Waste setting directly to the sewer.

3. Can Pool Floc be used in cartridge filter pools?

Yes, but you MUST REMOVE THE CARTRIDGE ELEMENTS prior to dosing. Broadcast the product, let the flocs settle for 12 hours, vacuum directly to waste with the pump, and reinstall clean cartridge elements only after the pool floor has been thoroughly vacuumed.

4. Does THP Chemical provide MSDS and VAT invoices for bulk orders?

Yes. THP Chemical supplies full Material Safety Data Sheets (MSDS), manufacturer technical application guides, and official commercial VAT invoices with every wholesale order to satisfy corporate procurement audits.