POOL FLOC - Swimming Pool Flocculant & Water Clarifier (2kg)

Pool Floc – Professional Liquid Swimming Pool Flocculant & Settling Agent

Pool Floc is an industrial-strength, premium liquid swimming pool flocculant directly imported for high-standard aquatic facilities. Formulated with high-potency water clarification technology, this product functions as an indispensable water clarifier flocculant and heavy-duty pool settling agent. When introduced into pool water, it instantly binds microscopic colloidal debris, dead algae cells, and suspended silt into heavy, cohesive flocs that settle firmly to the pool floor within 12 hours. As a fast-dispersing liquid, Pool Floc mixes instantly without prior dissolving, providing the ultimate rescue solution to clear severe water cloudiness for commercial operators seeking to buy pool floc bulk at competitive wholesale prices.

Technical Characteristics & Commercial Dosing Guide

Flocculation Mechanism & Key Advantages of Liquid Pool Floc

• Rapid Micro-Coagulation: When a pool becomes severely cloudy from storm runoff, airborne organic dust, or dead algae debris, suspended colloidal particles are too fine to be captured by standard sand media. Upon dosing liquid pool floc, the active agents rapidly attract and bridge negatively charged colloidal impurities, aggregating them into large, dense flocs that settle firmly to the pool floor.
• Rapid 12-Hour Total Floor Precipitation: Formulated with high-purity standards, the flocs form heavy masses that pack tightly onto the pool floor within 12 hours under static water conditions. This eliminates stubborn mid-water hazy layers and provides a clean separation line for effortless vacuuming.
• Ready-to-Use Liquid Convenience: Unlike traditional dry powders that require pre-dissolving and can leave powdery residues, the liquid formulation mixes instantly upon application, ensuring immediate dispersion and simplifying handling for pool technicians.
• Substantial Cost Savings: Low dosage requirements clear tens of thousands of liters of severely compromised water overnight, restoring brilliant clarity (< 0.5 NTU) without costly drain-and-refill procedures.

Practical Applications in Commercial & Aquatic Facilities

Engineered for rapid water recovery, Pool Floc is a vital emergency remediation chemical across commercial aquatic environments:

• Post-Storm Recovery for Outdoor Pools: Clears heavy silt, clay runoff, and organic debris washed into outdoor resort and hotel pools after severe monsoon weather.
• Algae Bloom Cleanup Post-Chlorination: After shocking green or yellow algae with sanitizers, dead algae cells remain suspended as a milky haze. Pool Floc aggregates dead cell fragments to the bottom for swift removal.
• Event Preparation & Fast Turnover: Rapidly clarifies high-end hotel and villa pools overnight prior to major guest events when regular multi-pass filtration is too slow.
• Raw Water Makeup Clarification: Rapidly clarifies new groundwater or municipal makeup water containing fine suspended particles prior to facility commissioning.

Standard 6-Step Technical Remediation Protocol

To ensure optimal flocculation efficiency and prevent sand media clogging, operators must adhere strictly to this 6-step procedure:

• Step 1 – Baseline Water Balance: Test pool chemistry: adjust Total Alkalinity (TA) to the standard 100 ppm, and balance pH within 7.2 – 7.6 to establish an ideal environment for floc formation.
• Step 2 – Switch OFF Pumps: Turn off all circulation pumps, filtration units, and aeration blowers to allow the water to become completely static.
• Step 3 – Apply Liquid Pool Floc: Measure the exact dosage (100 – 150 ml per 10 m³). Dilute in a bucket of pool water and pour evenly across the entire surface of the pool.
• Step 4 – Undisturbed Static Settling (12 HOURS): Leave the pool completely static and undisturbed with pumps off for a full 12 hours (recommended overnight) to allow flocs to settle firmly onto the floor.
• Step 5 – Vacuum Directly to WASTE: Attach a manual vacuum head and slowly vacuum the floor sediment directly out of the pool. MANDATORY: Set multi-port filter valve to WASTE. Never vacuum settled floc on the Filter setting to avoid blowing sediment back into the pool.
• Step 6 – System Restoration: Top up fresh water to operating level. Restart filtration and run continuously for 24 hours. Re-test and balance water parameters and maintain regular sanitation.

Commercial Supply Policy at THP Chemical

Tan Hung Phu Chemical Co., Ltd. (THP Chemical) is a direct importer and authorized B2B wholesale distributor of Liquid Pool Floc across Vietnam:

• 100% genuine imported product in factory-sealed containers with fresh production batches.
• Comprehensive compliance documentation: Batch-specific Material Safety Data Sheet (MSDS), detailed technical application manuals, and official VAT invoices provided with each order.
• Substantial ready inventories at our central logistics facility in Ho Chi Minh City for immediate parcel, carton, or pallet delivery nationwide.
• Technical support from experienced aquatic engineers to assist commercial facilities with water chemistry recovery and vacuuming protocols.

Frequently Asked Questions (FAQ)

1. Why did the flocs fail to settle to the bottom after adding Pool Floc?

This is typically caused by two factors: low total alkalinity (TA) or low pH (pH < 7.0), which inhibits the bonding action required to form dense flocs; or pumps left running during the settling phase. Always balance TA to 100 ppm, pH to 7.2 – 7.6, and keep pumps switched off for the full 12 hours.

2. Why must settled sediment be vacuumed strictly to WASTE?

The settled sediment is composed of coagulated flocs, dirt, and organic debris. Vacuuming on the Filter setting will break the delicate flocs under pump shear, forcing fine debris through the sand bed back into the pool while permanently fouling the filter sand. Always vacuum on the Waste setting directly to drain.

3. Can Pool Floc be used in cartridge filter pools?

Yes, but you MUST REMOVE THE CARTRIDGE ELEMENTS prior to dosing. Apply the product, let the flocs settle for 12 hours, vacuum directly to waste, and reinstall clean cartridge elements only after the pool floor has been thoroughly cleaned.

4. Does THP Chemical provide MSDS and VAT invoices for bulk orders?

Yes. THP Chemical supplies full Material Safety Data Sheets (MSDS), technical application guides, and official commercial VAT invoices with every wholesale order to satisfy corporate procurement audits.