POOL ALGAECIDE - Swimming Pool Algaecide & Water Treatment (Australia 5L)

Poly Algaecide 60% Non-Foaming – Liquid Green, Mustard & Black Algae Treatment for Commercial Swimming Pools (Australia)

Poly Algaecide 60% is an advanced, industrial-strength liquid swimming pool algaecide directly imported from Australia (Made in Australia) meeting high-grade technical Australian quality standards. Formulated with high-purity cationic poly dimethylamine epichlorohydrin (Polyquat) at a guaranteed active concentration of 60%, this high-potency pool algaecide 60 is completely non-metallic and copper-free. As a premier non foaming algaecide, it eliminates surface foam formation in turbulent waters, making it ideal for infinity pools, waterfalls, and hydrotherapy spas. Delivering unmatched broad-spectrum eradication of green algae, yellow mustard algae, and stubborn deep-rooted black algae treatment pool outbreaks, it represents the premier solution for commercial aquatic facilities looking to buy pool algaecide bulk with verified technical compliance.

Technical Specification Standards – Poly Algaecide 60% (Guaranteed Specification)

Cationic Biochemical Mechanism & Key Technological Advantages

• Cationic Polymer Membrane Disruption: Unlike conventional biocides, poly algaecide functions via electrostatic attraction. The positively charged polymeric quaternary ammonium chains electrostatically bind to the negatively charged cell walls of algae. This rapidly increases cell membrane permeability, triggering cytoplasmic leakage and osmotic lysis without allowing algae to build biological resistance.
• 100% Non-Foaming Formulation: Standard alkyl dimethyl benzyl ammonium chlorides (BAC / BKC) create persistent white foam when subjected to hydraulic aeration. Poly Algaecide 60% possesses a unique non-surfactant polymeric matrix, ensuring zero foam production even in high-aeration commercial jacuzzis, hydrotherapy jets, and infinity waterfall edges.
• 100% Copper-Free Formula – Zero Surface Staining: Conventional copper sulphate algaecides leave dissolved copper ions that precipitate to stain grout lines, discolour vinyl liners, and turn blonde hair green. Being totally organic and copper-free, Poly Algaecide is completely non-staining and safe for all pool finishes.
• Deep Penetration of Resistant Black Algae: Black algae form a dense, protective waxy coating with roots penetrating deep into plaster and tile grout. The high-density formulation of Poly Algaecide 60% penetrates this protective layer, destroying the root structure to prevent recurring blooms.
• UV Photolysis Resistance: While free chlorine degrades rapidly under solar ultraviolet (UV) radiation, the polyquat polymer remains biologically active and stable in open sunlight, providing prolonged residual protection.

Practical Applications in Commercial Aquatic & Industrial Systems

Engineered for high-efficiency algae control without foam or staining, Poly Algaecide 60% serves diverse aquatic sectors:

• Luxury Resorts & 5-Star Hotel Pools: The mandatory choice for infinity edge pools, vanishing edge designs, and decorative fountains where water movement makes conventional foaming algaecides unusable.
• Commercial Waterparks & High-Bather Pools: Prevents sudden algae blooms following summer thunderstorms, keeping pool floors and steps free of slippery algal biofilm.
• Industrial Cooling Towers & Closed Recirculating Circuits: Eradicates algal slime and biofouling in heat exchange condensers without generating foam inside the cooling basin.
• Residential Pools & Vinyl-Lined Facilities: Safely prevents green and black algae without bleaching or compromising vinyl membranes and fiberglass coatings.

Recommended Commercial Dosing Rates & Treatment Protocol

• Routine Weekly Maintenance Dosing (Prevention):
  • Application Rate: Apply 100 – 150 ml per 100 m³ of pool water.
  • Frequency: Dose once weekly after verifying that pH and free chlorine residuals are balanced, maintaining a continuous protective barrier against airborne algae spores.
• Shock Treatment / Severe Algae Eradication (Active Green or Black Algae):
  • Application Rate: Apply 300 – 500 ml per 100 m³ of pool water depending on algae density.
  • Step 1: Thoroughly brush algae patches off pool walls, floor steps, and tile grout lines to rupture the outer protective layer.
  • Step 2: Test and balance water pH to 7.2 – 7.6. An initial chlorine shock can be performed prior to treatment to weaken the algae colonies.
  • Step 3: Pour the calculated dose of Poly Algaecide directly around the perimeter of the pool, targeting areas directly in front of return inlet jets for rapid dispersion.
  • Step 4: Run the filtration pump continuously for 12 to 24 hours to filter out dead algae debris, followed by a thorough filter backwash to discharge collected organic waste.

Commercial Supply Policy at THP Chemical

Tan Hung Phu Chemical Co., Ltd. (THP Chemical) is a direct importer and wholesale distributor of Poly Algaecide 60% (Australia) serving resorts, waterparks, and aquatic maintenance contractors nationwide:

• 100% genuine Australian import (Made in Australia), fully compliant with premium Australian technical standards with guaranteed 60% active content.
• Versatile commercial packaging: Available in 5 Litre Jerrycans, 20 Litre Jerrycans, and 200 Litre Industrial Drums with factory seals.
• Comprehensive compliance documentation: Batch-specific Certificate of Analysis (COA), complete Material Safety Data Sheet (MSDS), and legal VAT invoices provided with each dispatch.
• Substantial inventories maintained at our central Ho Chi Minh City logistics center for prompt palletized dispatch nationwide at competitive wholesale rates.

Frequently Asked Questions (FAQ)

1. Why must pools with waterfalls and jacuzzis use Poly Algaecide instead of standard algaecides?

Standard algaecides (such as Benzalkonium Chloride) act as active surfactants that produce thick, unsightly foam when exposed to turbulent water movement. Poly Algaecide 60% is a non-foaming polymeric quaternary compound that creates zero foam even under high-aeration agitation, preserving the crystal-clear aesthetic of luxury pools.

2. Will Poly Algaecide 60% cause tile staining or green hair like copper algaecide?

No. Poly Algaecide is a 100% copper-free organic polymer. It eradicates algae via cationic electrostatic action without depositing heavy metal ions into the water, eliminating the risk of staining pool finishes or discoloring bathers' hair.

3. How soon can bathers resume swimming after adding Poly Algaecide?

For routine weekly maintenance dosing (100 – 150 ml per 100 m³), bathers can safely resume swimming approximately 30 minutes after chemical addition once the filtration system has dispersed the product. For shock treatments of heavy algae blooms, keep the pool closed for 6 to 12 hours until filtration and backwashing are complete.

4. Does THP Chemical provide batch COAs and VAT invoices for bulk orders?

Yes. THP Chemical provides batch-specific factory Certificates of Analysis (COA), 16-section MSDS sheets, and legal commercial VAT invoices with every wholesale order to satisfy corporate procurement and quality audit requirements.